Founded in 1995 and as a member of China National Crane Conveyor Machinery Association, China Chuanda Conveyor Belt Co., Ltd. is a specialized stainless steel conveyor manufacturer and custom stainless steel conveyors designer of various kinds of conveyors, belts, pulleys, bearings, rollers, bushings and so on. Through modern scientific management, excelsior products and technological design, advanced production tools and strict testing methods, we have produced various types of conveyance equipment. In 2001, we were certified by ISO9001: 2000, which has ensured the reliability and stability of product quality. Also, we have passed Germany DQS authentication in the domestic same trade. We have established long-term relationships with some famous mechanical manufacturers both at home and abroad, such as Veit GmbH, Hashima, Oshima, Summit, and KDK companies.

Suitable for manual labelling & cartoning operations provided with 9" or 12" wide canvas belt at the center of a MS or SS tables
size: 2 width x 3 Ht x 2 meter length or as per requirement.
Fixed speed or with variable speed (optional).
Provided with geared motor of 0.5 HP upwards depending upon the length and end use.
Our roller conveyors range from 300mm to 1000mm wide and are normally supplied in 3m sections. Roller diameters range from 35mm to 60mm diameter with up to 150kg per roller. Load carrying capacities up to 1500kg load per euro pallet are catered for with the XU1500 range. Stainless steel roller conveyors are also available.

We have been building this machine for over thirty years. The machines today are much improved from the older versions. Today's machines are built with heavy steel castings. The movable head slides up and down in steel and cast iron gibbs. The head has heavy roller bearings pressing on a hardened shaft. The pusher plate is mounted onto a bronze slide. Stainless Steel guarding is done throughout the Machine which is all O.S.H.A. approved. The machine is powered with a 10 H.P. Sumitomo Variable Speed Drive, with a maximum output of approximately 45 strokes per minute. An "On & Off" switch mounted into a watertight stainless box controls this drive. The machine will have a Stainless Steel Pusher Plate and Conveyor to handle the finished product after it is formed from the press. All the mounting hardware for the molds is included. The machine is powder coated instead of galvanized.

Go to China Bearing Manufacturer Catalog or China Bearing Products Catalog to find more China Products!