Founded in 1995 and as a member of China National Crane Conveyor Machinery Association, China Chuanda Conveyor Belt Co., Ltd. is a specialized rose joint manufacturer and custom rose joints designer of various kinds of conveyors, belts, pulleys, bearings, rollers, bushings and so on. Through modern scientific management, excelsior products and technological design, advanced production tools and strict testing methods, we have produced various types of conveyance equipment. In 2001, we were certified by ISO9001: 2000, which has ensured the reliability and stability of product quality. Also, we have passed Germany DQS authentication in the domestic same trade. We have established long-term relationships with some famous mechanical manufacturers both at home and abroad, such as Veit GmbH, Hashima, Oshima, Summit, and KDK companies.

Lifetime warranty. Industry leading durability and longevity. Exclusive Ultraselect Bearing Design exceeds OE specifications. Factory lubed to lengthen life and includes Zerk fitting. Superior torque and load handling ability. A premium quality U-Joint engineered and manufactured by GMB to handle exceptionally high loads and torque. Precision trunions and bearing surfaces provide a long life while the exclusive GMB Ultraselect Bearing Design exceeds OE specifications. Included is the factory lubing as well as a Zerk fitting for additional lubrication where applicable. These are quality U-Joints designed to provide years of satisfaction and durability. They will NOT accept, however, parallel shaft misalignment. All parts are constructed of non-ferrous materials with the exception of the alloy steel set screws. No lubrication is necessary. The unusual design of these units provide for continuous or interrupted motion with a minimum of backlash. Bore Tolerance +0.001 / - 0.000 inches. We have more than 200 types of U-joints available, equivalent to GKN, GMB, Koyo, Neapco, Precision, Rockwell, Spicer and OEM numbers.

This is the replacement U-Joint Set for the Traxxas Villain EX (TRAB19**) The u-joints are used to connect the prop shaft to the drive shaft. FEATURES: Metal and plastic construction INCLUDES: Two u-joints (metal base with plastic yolks) One u-joint connector ball Four 3x4mm set screws REQUIRES: Assembly into the kit following the instructions that came with the original model. kpm12/16/2003 ir/jxs, Spicer Greaseable U-Joint Kit for Front Axle Left or Right side. Spicer P/N 5-260-1x for Jeep CJ & YJ 1972-94. Replaces part number: 8126637S-G, They will NOT accept, however, parallel shaft misalignment. All parts are constructed of non-ferrous materials with the exception of the alloy steel set screws. No lubrication is necessary. Ox U-Joint for Dana 30, Dana 44, GM 10 Bolt (equivalent to Dana 5-297X and 5-760X) and Ox U-Joints for DANA 60 1 Ton applications. The Ox uses a multi-piece design, with a center body made of an 8620 alloy that has had some special and proprietary heat treatment. Instead of caps, the Ox has pins that insert through the axle yoke ear into the body and are retained inside a cavity in the body by a pair of 4340 alloy retainers. The pins are also 8620, but they get a different heat treatment than the body. The pins use an o-ring seal to keep water out.

Go to China Bearing Manufacturer Catalog or China Bearing Products Catalog to find more China Products!