Founded in 1995 and as a member of China National Crane Conveyor Machinery Association, China Chuanda Conveyor Belt Co., Ltd. is a specialized motor pulley manufacturer and custom motor pulleys designer of various kinds of conveyors, belts, pulleys, bearings, rollers, bushings and so on. Through modern scientific management, excelsior products and technological design, advanced production tools and strict testing methods, we have produced various types of conveyance equipment. In 2001, we were certified by ISO9001: 2000, which has ensured the reliability and stability of product quality. Also, we have passed Germany DQS authentication in the domestic same trade. We have established long-term relationships with some famous mechanical manufacturers both at home and abroad, such as Veit GmbH, Hashima, Oshima, Summit, and KDK companies.

The motor pulley is a very complex piece of kit (see pic) designed to isolate the motor, and speed change is by moving the belt from one pulley groove to another after removing the (tight fitting) spindle cover.
The suspension is interesting. The beautifully turned alloy feet take threaded rods up through the base and then up to the springs. There are simple one-piece spring supports (unlike the Orbe) which hold the conical springs - which appear coated with some polymer and certainly don't ring. The upper chassis plate just sits directly on these springs, no adjustment other than height being available. But then you bounce the table and what happens isn't what you expect. The springs are very stiff and so the turntable 'vibrates' much faster than the slow bounce of most tables which generally have suspensions tuned under 10 Hz. Attention to details can be found throughout the turntable, as illustrated by the brass and matching wood control knobs. The actual cost is very minor, but the results reflect the pride Sound Engineering takes in its products.

Manuf./Models: CANDY, ZEROWATΤ, OSTEIN
Part Codes: 92791466, 56.01.06.31., 166CY03,
Weight(kgr): 0,230
Package Dimensions(cm): 5 Χ 9 Χ 9
Delivery: Prompt Merchandise
Net Value: 15,375 € / unit
VAT(19%): 2,921 €
Final Price: 18,296 €
Custom pulleys for this profile are available. These are made to the same profile as original equipment pulleys.This one is Brass... heavier and more durable than aluminum.These will fit most US manufactures of Electric Motors. Multiples are available at 10% discount for three or more. Please email with your needs.This is a Three Step Pulley for a Watchmaker's Lathe Motor... as used in Watchmaker repair. The grooves work equally well with round poly belting and square or round leather belting, 1/8" to 3/16" crosssection.The motor pulley always has a smaller diameter that the flywheel on the pump as the latter also acts as a fan to create a positive flow of air which coolo the pump during operation.The trasmition ratio of BALMA compressors allows the pump to run at low speed, which is able to guarantee optimal levels of efficiency, lubrification, cooling and long life. Belt driven compressors are available in single and two stage. The latter having a much higher efficiency and lower noise level than the direct drive models.

Go to China Bearing Manufacturer Catalog or China Bearing Products Catalog to find more China Products!