Founded in 1995 and as a member of China National Crane Conveyor Machinery Association, China Chuanda Conveyor Belt Co., Ltd. is a specialized flange bearing manufacturer and custom flange bearings designer of various kinds of conveyors, belts, pulleys, bearings, rollers, bushings and so on. Through modern scientific management, excelsior products and technological design, advanced production tools and strict testing methods, we have produced various types of conveyance equipment. In 2001, we were certified by ISO9001: 2000, which has ensured the reliability and stability of product quality. Also, we have passed Germany DQS authentication in the domestic same trade. We have established long-term relationships with some famous mechanical manufacturers both at home and abroad, such as Veit GmbH, Hashima, Oshima, Summit, and KDK companies.

1) Extra-thin type Flange ball bearings are used for the downsizing and Lightweight designing because of their thin cross section
2) Bearings with a flange on the outer ring simplify axial location
3) Cost effective by not requiring spot facing when housing the end face
4) Many small balls are used in our extra thin type bearings, making frictionTorque and torque fluctuation low
5) Resilient and rotate smoothly
6) To reduce weight and wiring space, we recommend using pipe shaft
Bore size: 1-17mm5) Model: F682-F6803, F692-F6903, F6000, F629 ZZ NR6) Tolerance: ABEC-1 ~ ABEC-57) Grease: all kinds of grease available8) Seal: open, Z, ZZ, RS, 2RS, Teflon seals9) Different sizes available. The remaining part of the bearing is then machined down to 1/8" length and is used on the inner 1" channel. Because there is no flange on the inner hinge, an aluminum or nylon spacer must be installed around the bolt as a positive means of preventing the spacer from slipping out of the hinge.

As the igubal flange bearings are also suitable for dry operation, they are particularly considered for applications in which the installation site is difficult, in humid or wet environment, or with special demands on hygiene. Thus the igubal flange bearings are used for instance in wash-brush controls, in facade sunscreen systems, in materials handling systems and in bakery equipment.
According to type, igubal flange bearing are designed for mounting with 2 or 4 holes. The 2-hole types are provided with oblong holes that enable a trouble-free readjustment. A precise alignment of the bearing housing is not required as the flange bearing automatically compensates for error.
For shafts, igubal flange bearings with 2 and 4 mounting holes are available in standard dimensions of 5 to 50 mm. For delivery times and more dimensions, you may please contact us.

Go to China Bearing Manufacturer Catalog or China Bearing Products Catalog to find more China Products!