Founded in 1995 and as a member of China National Crane Conveyor Machinery Association, China Chuanda Conveyor Belt Co., Ltd. is a specialized drag conveyor manufacturer and custom drag conveyors designer of various kinds of conveyors, belts, pulleys, bearings, rollers, bushings and so on. Through modern scientific management, excelsior products and technological design, advanced production tools and strict testing methods, we have produced various types of conveyance equipment. In 2001, we were certified by ISO9001: 2000, which has ensured the reliability and stability of product quality. Also, we have passed Germany DQS authentication in the domestic same trade. We have established long-term relationships with some famous mechanical manufacturers both at home and abroad, such as Veit GmbH, Hashima, Oshima, Summit, and KDK companies.

DMC Incline Drag Conveyors are designed for strength and superior performance to maximize operation run time and minimize the length of delivery time.
Galvanized construction.
Take-up assembly on the head for accessibility.
Large profile UHMW paddles.
2.609" or 4" pitch roller bushed chain.
10 gauge center pan.
Removable 8 gauge bottom.
10 gauge sides on 13" and 17" tall conveyor. 8 gauge sides on 21" tall conveyor.
Head and tail slotted for shaft removal.
Pillow block
bearings head and tail.
1/4" UHMW shaft seals head and tail.
Flame cut hardened steel sprockets head and tail.
Pit Conveyor Optional Features:
Bend sections are available in 15, 30, and 45 degree.
By-pass dump hoppers are available in 6', 8' and 10' lengths.
By-pass inlet in 28" long.
Sectional dump hopper grating.
Class I or Class II drives.
Replaceable 3/16" abrasion resistant bottom with 16 gauge galvanized cover sheet.
Shock relay.
Split sprockets.
Manual or electric discharge gates.

Thomas offers two types of Drag Conveyors, Round Bottom and Flat Bottom. These types are especially suited for handling grain and other free flowing materials. The flights are made of UHMW and are bolted to a steel chain. Both utilize heat treated sprockets and a rail return system as standard features. When heavier abrasive materials need to be conveyed, contact us about our Mill Duty Drag Conveyor with Forged Chain.The Elevator is ideally suited to elevate a wide range of bulk materials in a relatively small space. If a material can be classified as free flowing or very free flowing, it can probably be elevated in a Screw Elevator. We offer Standard and Superscrew Elevators with several different drive arrangements to meet your requirements.
Transfer bulk materials vertically from one location to another
Inlet must be control fed
Typically used for free-flowing products

Go to China Bearing Manufacturer Catalog or China Bearing Products Catalog to find more China Products!