Founded in 1995 and as a member of China National Crane Conveyor Machinery Association, China Chuanda Conveyor Belt Co., Ltd. is a specialized close coupling manufacturer and custom close couplings designer of various kinds of conveyors, belts, pulleys, bearings, rollers, bushings and so on. Through modern scientific management, excelsior products and technological design, advanced production tools and strict testing methods, we have produced various types of conveyance equipment. In 2001, we were certified by ISO9001: 2000, which has ensured the reliability and stability of product quality. Also, we have passed Germany DQS authentication in the domestic same trade. We have established long-term relationships with some famous mechanical manufacturers both at home and abroad, such as Veit GmbH, Hashima, Oshima, Summit, and KDK companies.

This site has extensively researched each water closet beginning in 1930, providing original catalog pages, identification of original parts of that time, to the replacement parts of today. We also provide original color matrices, the years they were conceived and in some cases the original advertisements. The back outlet floor mounted bowl is used where the waste line is above the floor. It is manufactured in two different styles for either tank or flushometer applications. Even though it is a back outlet bowl it does not require a carrier to support the bowl. The bowl mounts to the floor, but the waste line exits out the back of the bowl. There are bowls that mount to the floor and have a bottom outlet as well. The roughing on the back outlet bowl varies by manufacturer. They start at about 4” from the center of the pipe in the wall to the finished floor. The tank to bowl kit above is specifically designed for an American Standard toilet. This kit is used to fasten this particular American Standard tank to the matching bowl. The purpose of this kit is to prevent a leak between the tank and the bowl while flushing the toilet/water closet.

Contactors are coordinated with the ABB molded case circuit breakers, disconnect switches and overload relays. Provides designers, panel builders and end users with the best performance, reliability and flexibility. Pre-assembled connections bar kits allow the close-coupling of ABB components to save space, assembly material, installation time and minimizes cabling. The new design of the large A-line contactors, places the magnet at the top of the unit and the main contact system at the bottom. This design provides a number of advantages over previous designs:Easy connection between the contactor and other system components because the terminals are at the same level.All connections to the control circuits are easily accessible from the front which facilitates installation and measurement. Not necessary to remove power cables for inspection and maintenance.Electrical operation of the contactor is impossible during contact inspection since the magnet system is removed with the front section. Low, built-in terminals and the option of terminal shrouds give you a touch-safe solution. NEMA, UL, IEC, CSA, VDE approved international standards

Go to China Bearing Manufacturer Catalog or China Bearing Products Catalog to find more China Products!